Norman, S.C., Wagner, D. W., Beaupre, G. S., Castillo, A. B. (2014).
Comparison of Three Methods of Calculating Strain in the Mouse Ulna in
Exogenous Loading Studies. Journal of Biomechanics, 48(1):53–8.
Woolson, S. T., Harris, A. H., Wagner, D. W., and Giori, N. J.
(2014). Component alignment during total knee arthroplasty using
standard or custom instrumentation: A randomized clinical trial using
computed tomography for postoperative alignment measurement. Journal of
Bone and Joint Surgery Am., 96(5), 366-72.
Carrera, R., Wagner, D.W., George, B., Leucht, P., Hunter, D., Helms J., Beaupre, G.S., Castillo, A.B. (2014). Early Axial Compressive Loading Delays Mineralization and Remodeling of a Tibial Cortical Defect in Mice. Biomedical Engineering Society Annual Meeting, San Antonio, TX.
Norman, S.C., Wagner, D.W., Beaupre, G.S., and Castillo, A.B.
(2014). An Alternative Method of Calculating Strain in Mouse Ulna
Loading Studies: Correlation with Bone Formation Rates. Orthopaedic
Research Society Conference, New Orleans, LA.
Wagner, D. W., Chan, S., Castillo, A. B., and Beaupre, G. S. (2013).
Geometric mouse variation: Implications to the axial ulnar loading
protocol and animal specific calibration. Journal of Biomechanics,
46(13):2271–2276.
Wagner, D. W., Stepanyan, V., Shippen, J. M., DeMers, M. S.,
Gibbons, R. S., Andrews, B. J., Creasey, G. H., and Beaupre, G. S.
(2013). Consistency among musculoskeletal models: Caveat Utilitor.
Annals of Biomedical Engineering, 41(8), 1788–99.
Wagner, D. W., and Reed, M. P. (2013). Step scaling and behaviour selection in a constrained set of manual materials handling transfers. Ergonomics, 56(6), 964–76. (pdf)
Wagner, D. W., Stepanyan, V., Shippen, J. M., DeMers, M. S.,
Gibbons, R. S., Andrews, B. J., Creasey, G. H., Beaupre, G. S. (2013).
Consistency among musculoskeletal models moment arms. American Society
of Biomechanics Conference, Omaha, NE.
Wagner, D.W., Castillo, A.B, Chan, S., and Beaupre, G.S. (2013). Axial Ulnar Loading in the C57BL/6 Mouse: Contribution of Inter-Animal Geometric Variation to Midshaft Periosteal Strain. Orthopaedic Research Society Conference, San Antonio, TX. (pdf)
Lindsey D.P., Wagner, D.W., and Beaupre, G.S. (2013). MicroCT based bone mineral content predictions can be significantly improved with a change in calibration methods. Orthopaedic Research Society Conference, San Antonio, TX. (pdf)
Wagner, D. W., Lindsey, D. P., and Beaupre, G. S. (2012). Replicating a colles fracture in an excised radius: Revisiting testing protocols. Journal of Biomechanics, 45(6):997–1002. (pdf)
Wagner, D.W., Lindsey, D.P., and Beaupre, G.S. (2012). Deriving ash
fraction from microCT bone scans. Orthopaedic Research Society
Conference, San Francisco, CA. (pdf)
Wagner, D.W., Lindsey, D.P., and Beaupre, G.S. (2012). A framework for
estimating bone strength along the distal radius and the effect of
eccentric axial load position. Orthopaedic Research Society Conference,
San Francisco, CA. (pdf)
Wagner, D.W., Lindsey, D.P., and Beaupre, G.S. (2012). Degree of bone
mineralization in the ultra distal radius as a function of type and
location. Orthopaedic Research Society Conference, San Francisco, CA. (pdf)
Wagner, D.W., Jaramillo, J., Hong, M., Fong, D., and Kiratli, B.J.
(2012). Assessing upper extremity total limb work volume in individuals
with spinal cord injury during Wii gaming. Academy of Spinal Cord
Injury Professionals, Las Vegas, NV.
Wagner, D. W., Lindsey, D.L, and Beaupre, G. S. (2011). Deriving tissue density and elastic modulus from microCT bone scans. Bone, 49(5), 931–8. (pdf)
Wagner, D. W. and Beaupre, G. S. (2011). Letter to the editor referring to the article ”mineral heterogeneity affects predictions of intratrabecular stress and strain” published in journal of biomechanics (volume 44, issue 3, pages 402-407). J Biomech, 44(9), 1826–7. (pdf)
Wagner, D.W. and Beaupre, G.S. (2011). Effect of strain gauge size and
placement during the mouse axial ulnar loading protocol calibration.
American Society of Biomechanics Conference, Long Beach, CA. (pdf)
Wagner, D.W. and Beaupre, G.S. (2011). Strain sensitivity of the
mouse
ulnar midshaft to perturbations of the axial ulnar loading protocol.
Orthopaedic Research Society Conference, New Orleans, LA. (pdf)
Prajapati, K., Kao, J., Wagner, D.W., and Barez, F. (2011). Dynamic force response of human legs due to vertical jumps. IMECE2011-62261. Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, CO. (pdf)
Wagner, D. W., Reed, M. P., and Chaffin, D. B. (2010). The
development of a model to predict the effects of worker and task
factors on foot placements in manual material handling tasks.
Ergonomics, 53(11), 1368–84. (pdf)
Wagner, D.W., Divringi, K., Ozcan, C., Grujicic, M., Pandurangan, B.,
and Grujicic, A. (2010). Combined musculoskeletal dynamics/structural
finite element analysis of femur physiological loads during walking.
Multidiscipline Modeling in Materials and Structures, Vol. 6(4),
417-43. (pdf)
Grujicic, M., Pandurangan, B., Xie, X., Gramopadhye, A. K., Wagner,
D.W., and Ozen, M. (2010). Musculoskeletal computational analysis of
the influence of car-seat design/adjustments on long-distance driving
fatigue. International Journal of Industrial Ergonomics, 40(3),
345–355. (pdf)
Grujicic, M., Arakere, G., Xie, X., LaBerge, M., Grujicic, A., Wagner,
D. W., and Vallejo, A. (2010). Design-optimization and material
selection for a femoral-fracture fixation-plate implant. Materials
& Design, 31(7), 3463–3473. (pdf)
Grujicic, M., Xie, X., Arakere, G., Grujicic, A., Wagner, D.W., and
Vallejo, A. (2010). Design-optimization and material selection for a
proximal radius fracture-fixation implant. Journal of Materials
Engineering and Performance, 19(8), 1090–1103. (pdf)
Wagner, D.W., Kirschweng, R.L., and Reed, M.P. (2009). Foot
motions in manual material handling transfer tasks: A taxonomy and data
from an automotive assembly plant. Ergonomics, Vol. 52(3),
362-383. (pdf)
Wagner, D.W. and Vallejo, A. (2009). Activities of daily living and
implant design: Evaluation of a femoral fracture fixed plate implant
during bicycle pedaling. Proceedings of ASME 2009 4th Frontiers in
Biomedical Devices Conference, Irvine, CA. (pdf)
Wagner, D.W. and Vallejo, A. (2009). Using activities of daily living
to evaluate the design and placement of a proximal radius fracture
fixation device. Proceedings of the ASME 2009 Summer Bioengineering
Conference, Lake Tahoe, CA. (pdf)
Wagner, D.W., Rasmussen, J., and Reed, M.P. (2007). Assessing
the importance of motion dynamics for ergonomic analysis of manual
materials handling tasks using the AnyBody Modeling System. SAE
Technical Paper 2007-01-2504, SAE Transactions: Journal of Passenger
Cars – Mechanical Systems, Vol. 116-6. (pdf)
Reed, M.P., and Wagner, D.W. (2007). An integrated model of gait
and transition stepping for simulation of industrial workcell
tasks. SAE Technical Paper 2007-01-2478, SAE Transactions:
Journal of Passenger Cars – Mechanical Systems, Vol. 116-6. (pdf)
Wagner, D.W., Reed, M.P., and Chaffin, D.B. (2006). A task-based
stepping behavior model for digital human models. SAE Technical
Paper 2006-01-2364, SAE Transactions: Journal of Passenger Cars –
Electronic and Electrical Systems, Vol. 115. (pdf)
Wagner, D.W. and Reed, M.P. (2006). Applying statistical
process
control to identify transitionary foot motions during manual material
Handling Transfer Tasks. American Society of Biomechanics
Conference,
Blacksburg, Virginia. (pdf)
Hoffman, S.G., Chaffin, D.B., and Wagner, D.W. (2006). Shoulder
strength and balance guided posture selection during a battery
maintenance task. 2006 SAE World Congress, Detroit, Michigan. (pdf)
Wagner, D.W., Reed, M.P., and Chaffin, D.B. (2005). Predicting foot
positions for manual materials handling tasks. SAE Technical
Paper 2005-01-2681. SAE Transactions: Journal of Passenger Cars –
Mechanical Systems, Vol. 114. (pdf)
Wagner, D.W. and Reed, M.P. (2005). Dynamic calibration of an
extended-range electromagnetic flock of birds motion tracking
system.
International Society of Biomechanics Congress, Cleveland, Ohio. (pdf)
Reed, M.P., Parkinson, M.B. and Wagner, D.W. (2004). Torso kinematics in seated reaches. Technical Paper 2004-01-2176. SAE Transactions: Journal of Aerospace, Vol. 113. (pdf)
©2014 David W. Wagner